The constant temperature incubator adopts a perfect design. Arc shape and surface spray treatment, high texture appearance, and the use of flat non-reverse handle, easy to operate, safe and reliable. And won the praise of the majority of users.
So how does the constant temperature incubator carry on the maintenance, the clean maintenance in the daily work?
1. External cleaning and maintenance of the constant temperature incubator
1) Incubators should be cleaned of internal impurities before operation.
2) The power distribution room should be cleaned at least once a year or more. When cleaning, vacuum cleaners can be used to suck indoor dust.
3) The exterior of the cabinet must also be cleaned more than once a year. Wipe with soap and water before cleaning.
2. Constant temperature incubator Inspection and maintenance of humidifier Water storage in the humidifier should be replaced once a month to ensure that the water quality is clean. The humidifying water tray should be cleaned once a month to ensure smooth water flow.
3. Constant temperature incubator When checking the temperature and humidity of the over-temperature protector, the maximum value of the over-temperature protection setting is 20°C~30°C. When the temperature in the test chamber rises to the set point of the over-temperature protection, the heater power supply stops, and the "OVERHEAT" over-temperature warning light is on but the fan is still running.
4. Constant temperature incubator Condenser dust removal The condenser should be maintained on a regular monthly basis, using a vacuum cleaner to suck dust from the condenser heatsink mesh or use high pressure air to remove dust.
5. Replacement of the constant temperature incubator wet ball test cloth When the surface of the test cloth is not clean or hardened, or after the temperature control is completed, the test cloth must be replaced before continuing the temperature and humidity sphericity control. The test cloth is replaced about three months. When replacing, wipe the temperature measuring body with a cleaning cloth. When replacing the new test cloth, clean it first.
6. Constant temperature incubator Wet bulb water level check and adjustment The water level of the water reservoir should not be too high, so that the water overflows the water reservoir or is too low to allow the wet ball test cloth to absorb water abnormally, affecting the accuracy of the wet bulb. The water level is maintained at about six minutes You can. Adjust the water level of the stagnant water tank to adjust the height of the water tank.
Shower Shelf made of pure acrylic contact the water pipe and spray more perfectly. Free-standing design for use in or outside the shower . Great for corners, bathroom counters, and vanities.Made of steel with rust-resistant satin finis. A standard mount and concealed screws are included for easy installation.Quality materials, the best choice for your home life. Make the bathroom more comfortable, make life better.
Shower Shelf,Wholesale Shower Shelf,Modern Shower Shelf,Bathroom Shelf For Shower
Zhengzhou LaDingWan Sanitary ware Co., Ltd. , http://www.hnldow.com