According to the principle of recycling of plastic waste from container packaging, Kawasaki Steel successfully developed a series of process technologies for the use of plastic waste on blast furnaces. The feature of this technology is whether there is vinyl chloride material in the waste plastics, which can be dechlorinated, then solidified, crushed, and converted into similar pulverized coal products.
Its specific approach is: Put the vinyl chloride-containing waste plastic into a solvent heated to about 2000°C. After stirring, chlorine is extracted from vinyl chloride to make hydrochloric acid recovery. Dechlorination resin can also be recovered from the solvent.
These technologies were jointly developed by the Kawasaki Steel Corporation and the Institute of Earth and Environment Technology. It took about three years from 1998 until it was completed at the Chiba Steel Institute in August last year to remove waste plastics. Chlorine experiment. The blast furnace injection experiment uses plastic after dechlorination through an experimental device. Usually, a plastic that has been dechlorinated by a tuyere that was originally injected with pulverized coal is injected to replace the method with the same amount of pulverized coal injected. At present, after the dechlorination, the air flow, blowing, reduction, and combustion of plastics are performed smoothly, and industrialization experiments are being prepared.
Its specific approach is: Put the vinyl chloride-containing waste plastic into a solvent heated to about 2000°C. After stirring, chlorine is extracted from vinyl chloride to make hydrochloric acid recovery. Dechlorination resin can also be recovered from the solvent.
These technologies were jointly developed by the Kawasaki Steel Corporation and the Institute of Earth and Environment Technology. It took about three years from 1998 until it was completed at the Chiba Steel Institute in August last year to remove waste plastics. Chlorine experiment. The blast furnace injection experiment uses plastic after dechlorination through an experimental device. Usually, a plastic that has been dechlorinated by a tuyere that was originally injected with pulverized coal is injected to replace the method with the same amount of pulverized coal injected. At present, after the dechlorination, the air flow, blowing, reduction, and combustion of plastics are performed smoothly, and industrialization experiments are being prepared.
Galvanized Barbed Wire
Galvanized Razor Barbed Wire is made by high quality galvanized wire , it's widely used as protecting wire fence in many fields , such as in national line , railway , high way , airport etc .
CQ is a professional manufacturer of Gabion and Gabion Mattress and have passed ISO 9001:2008 QMS in 2014. Our Gabion and Gabion Mattress can reach or exceed ASTM A975 or EN 10223-3 Standard and gain high reputation from worldwide clients!
1)Products through strict control
2)Certification ISO9001: 2008
3)Seriously deal with each customer
4)We are happy to serve you
Why Choose CQ
1) OEM available;
2) 8 years production experience make us more professional in the Gabion fields;
3) 6 machines for manufacturing, faster production and short delivery time;
4) All manufactured conform to the ASTM A 975, standard demension;
5) Pass the ISO9001 Certificate, high quality could make all clients rest assured.
Galvanized Barbed Wire,Electro Barbed Wire,Concertina Barbed Wire,Electro Razor Barbed Wire
Anping Chuangqian Wire Mesh Co., Ltd , https://www.apcqwiremesh.com