Bougainvillea is not only a common garden plant, but also a good potted plant and a good material for making bonsai. As we know, both potted plants and bonsais are indispensable for trimming, not only for more ornamental, but also for the healthy growth of bougainvillea plants. The pruning bougainvillea trimming and shaping is now introduced as follows.
Trimming of bougainvillea 1. Trimming time: In general, the pruning time of bougainvillea is after spring germination. Because of this time period, we can determine which branches are weak, which are strong and which are dry. Can have a more obvious control of the pruning of the bougainvillea.
2. Pruning method: The first pruning time is from March to April, and the branches that are not suitable for the modeling needs are cut off, leaving the relatively thick branches to be truncated, leaving room for new branches to grow, and leaving flowers for growth. space. The thicker the pruning branches are, the stronger the germination is. The second pruning is carried out in the hot, rainy days of June, July and August. This is a good time for the long tree potential. During this period, fertilizer should be applied to promote the health of the branches. Growing. However, if there is too much fertilization, there will be long branches and must be cut off. For the purpose of not destroying the plant type, appropriate germination, and the overly dense and weak buds are erased to ensure uniform distribution of the crown branches without crowning. After the pruning, the newly grown shoots will be trimmed again after lignification.
The shape of the bougainvillea 1. The bougainvillea basket type: The bougainvillea is trimmed in a flat shape, and the stalks are trimmed off. At the opposite corners of the plane, each branch of 500~600mm is left, and the branches are bent. Overlap at 100~200mm, tie them together to form the girders of the flower basket, and the flower basket-style bougainvillea bonsai is complete!
2. Triangle Meibao Tower: Cut all the side branches of the bougainvillea, leaving only one or three upward erect branches. If you want to stay together or tie them together, wait until they reach the ideal height, cut off the top and make it Germinating lateral buds, at intervals of 400-500 mm, remove excess buds to form a multi-tower. 3. Bougainvillea Cliff type: The lashing method is adopted to make the branches of the bougainvillea drooping like a cliff. The cliff-shaped bougainvillea bonsai was completed. 4. Triangular koji dry type: Bundle bougainvillea that has been grown for 1-2 years, bundled with a rope at the main part 10-20 cm from the root and shading, changing its growth direction, bending it, and bending the shape The beauty is different.
Trimming is to reduce the consumption of bougainvillea growth, to promote the growth of the branches more robust; shaping is to make the bougainvillea potted plants more ornamental. In the above, I introduced the pruning and shaping of potted bougainvillea, I hope to be helpful to everyone!
This kind of special designed post can be installed with the panels without clamps and bolts, with easier installation and wider application.T post enjoys an improved rate of 30% in its mechanical property and physical property compared with common steel posts with same section size.T post have nice appearance, easily used, with a low cost. It can also be recovered after years, meet the requirement of national environmental protection, is a kind of environmental friendly product.Steel T post painted commercial grade Fence Post and tree stake; rail steel construction punched, studded and painted green brown and galvanized for all applications steel T-bar posts. It`s many uses include: snow fence,construction fences,hinge lock farm fences.
T Post,T Post Fence,Steel Fence T Post,Metal T Fence Post
Hebei Giant Metal Technology Co., Ltd. , https://www.hebeigiantmetal.com