How to choose panel furniture

Applicable: the price is far lower and solid wood furniture, affordable, suitable for the public family to buy.

One: how to choose panel furniture

It is very important to choose panel furniture to focus on three aspects: environmental protection, quality - durability, style

Environmental protection: the selection of the substrate - the substrate selected by the red apple is made by the logs imported from Southeast Asia. The finished furniture will not crack and will not be deformed. The edge band imported by German Ruihao and the furniture after punching are used. Still 100% in line with European E-1 environmental certification. The only brand of furniture that is exported to 43 countries and regions. Many brands in the market are playing EO boards, but the finished furniture after punching is not up to this level.

Quality: good furniture depends on the details of the workmanship (red apple) selected hardware accessories: door hinges for Italian Ferrari door hinges more than 30 degrees of opening and closing are automatically positioned, the difference between the furniture door hinge opening and closing is not up to this extent of. The rails are made of 1.2 mm thick cold-rolled steel plates imported from Japan. The sliding is smooth, the ordinary furniture rails are only 0.8 mm thick, and the service life is doubled compared with the red apples.

Style: The style of the red apple is fresh, crisp, simple and modern, and it is unconventional, and it is warm and romantic and generous.

First, carefully check the quality of the wood-based panels. Most of the furniture sold on the market is made of plywood, with ash as a good texture, beautiful and durable. If it is a plastic veneer, it should be seen from the side whether there is any seam around the board surface. The plastic veneer is pressed with a layer of decorative paper or surface paper. If there is a gap, the process is not easy to handle. Deformation. There is also a fine wood veneer panel, which is a 0.2-0.3 mm wooden strip attached to a common object board. This should check whether the seam of the wooden strip is tight, the texture of the wooden strip is smooth, and the texture is messy. .

Second, pay attention to the firmness of the furniture structure. Gently push the furniture by hand. If there is a sway or a squeaking sound, the structure is not firm.

Again, pay attention to the gaps in the active part of the furniture. For example, the door joints and the drawer joints are suitable for the gaps. From the suitability of these gaps, the fineness of work can be seen. If the gap is large, it means that the work is rough, and it will be deformed after a long time.

After that, you should also pay attention to see if the furniture is a single box or a double box. Open the door and see if there is a layer inside the board. Usually, in addition to the outer layer, there should be a layer inside. This is called a double box, which is both beautiful and strong, but not in a single box. If it is disassembled, you should also check the metal connectors. The metal connector has two kinds of hollow screws and eccentric connectors. It is necessary to try to check whether the screws are firm. If it is an eccentric connector, you should check whether the connectors and the plate are finely attached.

Finally, it is also necessary to consider whether the color of the furniture is compatible with the color of the interior wall and the floor. What often happens is that everything else is good, that is, the color is not ideal, which is also an important reference standard.