Yi Le Pu ultra-luxury outdoor double leisure bed (air mattress) read the full text >>


Then I went to the outskirts of Beijing to try a double aluminum alloy leisure bed and double inflatable mattress. The size of the inflatable mattress is 137X191X22cm, and the product model number is 27203. The air mattress kit includes 4 items, an air cushion, an air pump, a travel backpack and a repair kit. One of the repair kits has a tube of strong glue and two round patches.

The total weight of the entire kit is 4.2kg. The backpack can hold both the air pump and the mattress. There is a backpack strap outside the backpack. It is very convenient to carry. (figure 1)


The electric air pump is also a product of the company, not a small workshop, but it can be stored for one year. Electric air pump is 220V, 50HZ, generally 220V car power can be used. There are three air nozzles in the air pump, except that the second one is dedicated to inflate the mattress, and the other two mouths can also be used for other inflatable products. The air pump has two ports, one air intake and one air outlet. When air is inflated, air inlet is used. When air is exhausted, air outlet is used. The two-way inlet and outlet air shorten the operation time. (figure 2)


The air-cushion inflation port has two valves. One is a safety valve plug and the other is a safety valve. The safety valve plug is the outermost button. It has a small film to ensure the air intake. When the air is full, the small film is automatically closed. At the same time, it can only be inhaled and can not be out of breath, this design is a little bit like the concept of a watertight cup used by children. The safety valve is directly screwed on the air bed. When the air is deflated, the safety valve can be opened and the maximum air nozzle can be used to pump air. (image 3)


When inflating, tighten the safety valve, open the safety valve plug, and insert the gas nozzle of the electric air pump into the inflatable air nozzle. The manual says that it is sufficient to inflate it to eight minutes. When the inflation valve is closed, it can be covered. used. (Figure 4) I spent more than 2 minutes in the entire inflation process. (Figure 5)




Let's take a look at this gas bed after it has been filled with gas. Its length is 1.91 meters and its width is 1.37 meters. Being a double bed is a bit narrow, but as a leisure product, it is a luxurious size. At the same time, it can also be placed in a "one-step" tent for use.

Its height is 22cm, and it is very thick. It can bear a weight of 400 pounds. This is a very difficult weight for a family of three. The top of the inflatable bed is flocked, increasing comfort, and the other fabrics are PVC, but not a little plastic, and the quality is good. There are many small cylinders filled with air inside the inflatable bed, which greatly improves the comfort of the bed and increases the durability. (Figure 6)


My friend is quite burly and I let him experience it in an inflatable bed. He said, "I'm lying down very comfortably. The support is good and I won't collapse." I let another friend lay down again. The two men tried it together. They said: "Two people have no problem, the air is not They will all go in the middle, and the two people will not be affected by each other. The hardness is right."

This inflatable bed is very good moisture-proof and thermal insulation, go out to play, live in the suburbs one night more than the average air bed to be more comfortable, especially families with children, children are not afraid to catch cold.

When the air is deflated, use the air pump to pump another mouth. At this time, you should open the safety valve and use the largest air nozzle to pump air. However, be careful not to put the safety valve to the person. The time is also very fast, 4-5 minutes will be fine. The gas was very clean and the inflatable bed was easy to recover. (Figure 7)


Very intimate, the manufacturer is equipped with a repair kit, as long as it is not a big damage, with a repair kit on it, just like the tires to the bicycle repair the same reason, the operation is very simple. This full set of combinations will allow me to use it with confidence. In fact, this inflatable mattress is also very convenient for use at home. It is very convenient to buy such a mattress, as some people often come to live or move frequently at home.

10QT Ice Bucket:

There are various kinds of handles for 10QT ice buckets, including inner handles, fixed handles, flexible handles and wooden handles, etc. The color of the oval ice barrel is bright and colorful, and can be applied to creative bars, beverage shop.

Description of the 10QT ice bucket:

Name:10Qt Ice Bucket

Spec:Φ300×Φ200/Φ270mm×Φ155mm×165mm

Material: galvanized iron

Note: can hold 8 beer bottles of 355ml

Fields of applications: bar, party, hotel, home, outdoor activity



10QT Ice bucketoval ice buckets

handles and bottle openers


1.Are you factory ?

Yes. A professional Ice Bucket and Tin Tray manufacture.

2.Are your products the lowest prices ?

EXW, the same quality, we are much cheaper than other suppliers.

3.Can we customized product ?

Yes, Tailor-made tooling for your own design is welcome.

4.What is the transportation ?

If small quantity, we suggest that sent by Courier, If large amount, by shipping.

5.If goods are damaged in transit, how to do ?

Products are inspected strictly before shipping, if damage, they can be replaced .



10QT Ice Bucket

10Qt Ice Bucket,Stainless Steel Ice Bucket,Led Ice Bucket,Metal Tin Ice Bucket

True & Bright Metal Packaging Co.,Ltd.KaiPing , http://www.tnbcan.com