When purchasing finished furniture or custom furniture, it is likely to cause some regrets due to lack of planning for future storage or storage. In this issue, we asked the owners who have similar experiences to come out and hope that they can give wake to the later people.
The display stand is always "not enough"
In order to wrap up the air conditioner on the TV wall and the chaotic lines under the TV, the display rack of the entire wall was customized. I thought that this way not only can block the block, but also the function of storage, display and bookshelf. I saw the designer's simple design and felt "beautiful."
Although I have already made a lot of plans at home according to the size of the drawings provided by the designer, I was really surprised when I entered the door: "How is it so big!" The cabinet that has always been done in the ceiling is very cumbersome, although the air conditioner and the chaotic line are Covered, but the living room is therefore a lot smaller, the cabinet depth is more than 20 cm larger than the thickness of the air conditioner.
The most terrible thing is that each display is too large, with a depth of 47 cm and a height of 35 cm. The general book is put in, and there is still 20 cm left, and there is about 26 cm of open space in front. So, even if the last layer of the grid is set up, and some small ornaments such as vases are placed outside, the display cabinet still feels empty, and how to "feed not enough."
★ Lessons: The imagination of the average person in three-dimensional space is still limited. Even if you know the specific size, it is difficult to construct the final form of the customized product. Therefore, it is recommended that you communicate with the designer when customizing similar products, and take into account the size of the items you want to place. Although the designer will provide more professional advice, but after all, I am living myself, how comfortable I only know. Reader Ms. Zhang
Who will save the "twin" wardrobe
My cabinet was bought ten years ago. In the past, the design of the pants rack was still a new wave. However, when I bought it, I didn't carefully consider how to arrange the storage of clothes. However, the guide said that the partition of the wardrobe design can be dismantled. Only one phone is needed to add the partition, and the manufacturer can deliver it in time. cost). If you think about the transformation, it is convenient to customize the two wardrobes with the same pattern according to the key needs of clothes hanging and being stored. But it didn't take long, I regret it.
In the course of use, I found that the interior of the same pattern of the wardrobe appeared to be a significant waste of space. First of all, there are not so many trousers in the house that need to be hung in the closet at the same time, resulting in the trousers rack of one of the closets being idle. This part of the space is large, it is inconvenient to store the sundries, and there are no holes for the partitions on both sides of the cabinet. It is not necessary to add the partitions.
The clothes that need to be hung in the daily home only need to occupy the hanging space of one cabinet, and the hanging space of one of the wardrobes is also insufficiently utilized. Looking at the cabinet is not crowded, but the family's bedding has no place to put it, only to increase the storage space on the balcony.
★ Lessons: The layout of the cabinet can be well planned, where to hang clothes and where to put it. But when the mind is hot, simply copy the two cabinets, and the result is a waste of space. Later, it was found that the increased partition service provided by the manufacturer required ordering, scheduled delivery, and the price was not cheap, so it was not willing to buy it. At present, it can only be solved by purchasing a storage box, but the cost is not low.
Large lattice change debris bucket
At that time, I also considered that there would be more and more things at home, so I thought about making more cabinets for storage. When designing these cabinets, I deliberately designed a large storage space for the badminton bag in my home and the large vase I envisioned. However, what I did not expect was that these two large spaces eventually became "chicken ribs" that were difficult to handle, but they became helpless.
After our cabinets were installed, I found that the large lattice used to hold the badminton bag was really big. If the badminton bag was put in, other things could not be stuffed in, and the huge storage space was lost without any reason. The plaid that was prepared to hold a large vase was also because it was super large. After entering the real life, I didn't want to waste it to install a useless vase. However, because these two spaces are large and there is no division, there are difficulties in storage. In the end, only books and sundries can be piled up inside, which is neither good nor good. It is very irritating.
★ Lessons: The bigger the space, the less convenient it is to store. Pay special attention to this principle when designing storage furniture. The home improvement is finally to make the home more comfortable and convenient, and some decorations that are not available can also be considered for removal.
Poker chips, which are also called Casino tokens (also known as casino or gaming chips, checks, or cheques) are small discs used in lieu of currency in casinos. Colored metal, injection-molded plastic or compression molded clay tokens of various denominations are used primarily in table games, as opposed to metal token coins, used primarily in slot machines. Casino tokens are also widely used as play money in casual or tournament games.
Get various styles of poker chips and Poker Chip set from Bescon!
All our poker chips are available for customized artwork!
Poker Chip
Three Tone Poker Chips,Printing Poker Chips,Custom Poker Chips,Casino Poker Chips
BESCON INDUSTRIAL CO., LIMITED , http://www.besconcn.com