Whenever we step onto the school campus, we notice that most of the sports equipment is concentrated near the sports ground, while the teaching areas are somewhat separated from the sports zones. Besides inter-class activities and physical education classes, students usually don't have much opportunity to exercise outside of these times, often staying close to their classrooms. To make it easier for students to take advantage of 10-minute breaks or other free moments for quick workouts, Nanjing Shangyuan Middle School has explored creative ways to promote a culture of constant movement and accessibility to fitness. In 2013, the director of the school's education and technology office visited Singapore as part of a training group organized by the Jiangsu Provincial Department of Education. Before the trip, the principal emphasized the importance of observing Singapore’s campus culture, facilities, and management systems. Upon arrival, the team was impressed by how sports equipment was strategically placed on every floor of the buildings, allowing students to move and exercise freely at any time. This inspired the school to rethink its approach to integrating fitness into daily life. Inspired by this experience, the school began implementing a series of changes. They focused on selecting appropriate small fitness equipment, determining ideal installation locations, considering student height, and ensuring safety. A special meeting was held with the physical education teaching group to develop an action plan called “Sports Activities Around.” The school also assigned responsible personnel to conduct regular equipment inspections, ensuring that every stage—from class time to after-school activities—was monitored. Periodic displays of results were used to motivate students and encourage consistent participation. Each piece of equipment now comes with clear usage instructions. Physical education teachers use class time to teach students the correct techniques for using the equipment, making the activities more scientific and professional. This not only enhances the quality of the exercises but also increases student interest and enthusiasm. As a result, students started exercising intentionally or unintentionally in various places: 1. Push-up bars are installed near the pool. Students often use them when they go to wash up. 2. High jump equipment is placed in wide corridors, where students naturally jump when passing by. 3. Pull-up bars are installed on each floor, and students gather there during class breaks. 4. Standing long jump mats are located near student entrances, becoming popular spots during rainy days. 5. Balance beams and monkey bars are set up in front of classrooms, encouraging students to walk across them. 6. Sit-up mats and climbing walls are placed in the sports field, where students relax and compete during lunchtime. Since installing the equipment, several unexpected benefits emerged: - Bathroom signs that once hung in the hallways are now used for high jumps, and the signs no longer fall. - Students stopped using door frames for pull-ups after the proper equipment was installed. - Many students who previously avoided sports now enjoy being active, shifting from "I have to exercise" to "I want to exercise." Today, the school's "Sunshine Movement One Hour" has taken on a new meaning. Loving sports, participating in physical activity, and promoting an active lifestyle have become a trend among students. They run, jump, and move around the campus, bringing energy and vitality to the whole environment.

Bulk Cement Truck|Powder material truck

Bulk Cement Truck|Powder material truck

Bulk cement truck, also known as powder material carrier, by a special purpose vehicle chassis, bulk cement vehicle tanks, tracheal road system, automatic discharging device and other parts. Suitable for fly ash, cement, lime powder, mineral powder and granular base grain diameter is not more than 0.1 mm powder dry bulk transport of materials. Mainly used for cement, cement warehouse and large construction sites, can save a lot of packaging materials and loading and unloading work.

CLW GROUP TRUCK Bulk cement vehicle description

Bulk cement truck, also known as powder material carrier, by a special purpose vehicle chassis, bulk cement vehicle tanks, tracheal road system, automatic discharging device and other parts. Suitable for fly ash, cement, lime powder, mineral powder and granular base grain diameter is not more than 0.1 mm powder dry bulk transport of materials. Mainly used for cement, cement warehouse and large construction sites, can save a lot of packaging materials and loading and unloading work.

CLW GROUP TRUCK Bulk cement transportation Semi-Trailer

Bulk cement truck chassis

Can choose dongfeng chassis, chassis, fukuda chassis of liberation and steyr heavy vehicle chassis, jianghuai chassis.

Bulk cement tank car

Bulk cement tank car is mainly composed of cylinder, the top of tank for inlet, fluidized bed, discharge tube assembly, of intake pipe and other accessories.

At the top of tank is equipped with two or three mouth to feed

CLW GROUP TRUCK Bulk cement truck tracheal road system

Bulk cement truck front, air chamber after each set an air inlet pipe, can be realized respectively by ball valve at the same time open and separate control.

CLW GROUP TRUCK Bulk cement truck Working principle of the system are as follows: motivation from the car gearbox, through the transmission device drives the air compressor, the compressed air in the gas pipeline interior control, make the tank of powder material produces fluidization phenomenon. When the pressure is 0.196 Mpa, open the discharge butterfly valve, discharge.

CLW GROUP TRUCK Bulk cement truck Use manual bulk cement truck

1, don't overspeed driving bulk cement truck, overpressure, running speed and overpressure can severely damage the air compressor. This machine is the highest speed main technical parameters see table, work pressure is 0.2 MPa.

2, don't start or stop the air compressor, fast and slow growth or slow down, otherwise, the impact force will damage the compressor.

3, don't change the rotation direction of air compressor, otherwise, the oil pump is not oil can seriously damage the machine.

4, do not stop in front of the reduced pressure air compressor, otherwise, the powder material may go back into the cylinder, air compressor is serious damage.

5, need to check the oil before starting the standard. Oil oil level shall not be lower than the lower limit; Need to check whether the oil pump oil supply, without oil, it is necessary to stop the machine immediately to check, otherwise, oil shortage will seriously damage the air compressor.

6, to timely replacement lubricating oil. Phone use after 30 hours, discharge of oil in the crankcase, clean inside the crankcase and oil screen, and then an oil change. According to the above oil change once a year later.

7, to check, clean oil screen. Normal quarterly inspection, cleaning time, if the machine utilization rate is high, should check and clean once a month.

8, this machine is used for CD40 lubricating oil diesel oil. Ban on different type of lubricating oil to mix, or lubricating oil deterioration will affect the lubrication effect.

9, each working 30 hours to maintain, clean air filter. While rotating filter pressure is less than 0.6 MPa compressed air blowing from inside to outside. Maintenance after five times, please replace the new filter. It is forbidden to oil or water to clean the filter element.

Bulk Cement Truck,Bulk Powder Truck,Cement Tanker,Powder material truck

CLW GROUP TRUCK , https://www.clwgrouptruck.net