A bottle of material:
Print material if it is not pure
If the printing material is not pure, it will have a considerable impact on the adhesion. In the current market, the impure printing material is mainly expressed in the synthetic material and material. Due to process differences in different companies during injection molding, the surface of the plastic material appears different
In addition, there are many materials with grease on the surface that can affect its adhesion. The color of the bottle's material also has an effect on the UV light reception, which also affects its adhesion.
Two bottles of prepress processing
In order to obtain good adhesion of the ink to the substrate, the bottle must be polarized to achieve a surface tension of not less than 3.8 x 10-2 N/m. (In general, the ink is good for the substrate. The most basic condition for adhesion is the substrate sheet
The surface tension reaches at least 50dyn/cm).
The method of polarizing the bottle is mainly flame treatment. The principle of flame treatment is to decontaminate the plastic surface through high temperature and melt the surface of the film layer, thereby increasing the surface energy of the plastic bottle and improving its surface adhesion to the ink. In short, before printing
It must be ensured that the surface of the substrate is clean and the polarization treatment is effective. The surface treatment of the bottle is incomplete, and the adhesion must be affected.
Flame treatment
The flame processor is composed of conveyor belts, tapered inserts, flame nozzles and gas tanks. When used, the plastic bottle is placed on the tapered insert and the conveyor belt moves forward uniformly. Before reaching the flame nozzle, the conical insert starts to rotate, and at the same time, the bottle is rotated, and the blue flame ablates the surface of the plastic bottle. Improve the surface energy of plastic bottles and increase the binding force with ink. The strength of the flame, the running speed of the conveyor belt, and the smoothness of the rotation of the bottle all directly affect the treatment effect, among which the smoothness of the rotation of the bottle is the most critical. The degree of smoothness is proportional to the size of the bottle. The shorter the bottle, the smaller the radius and the better the effect after treatment. For larger bottles, we must take measures to increase its smoothness. The commonly used method is to attach a nylon sleeve to the tapered insert. The inner diameter of the sleeve is also conical, and the outer diameter is equal to the size of the bottle mouth. The jacketed bottle cannot drop on its own and must be removed manually. The flame-treated plastic bottles should be immediately printed, otherwise the surface energy of the plastic bottles will be reduced, and the secondary dust will be easy to affect the adhesion of the ink.
Flame treatment effect detection
The easiest method is to use a surface tension test pen for testing. The 3.8×10-2N/m specification surface tension test pen is used. If the liquid marks in the test stroke spread evenly and do not shrink, it indicates that the treatment effect is good; if the liquid marks shrink, or
If the liquid marks are partially contracted and the crotch part does not shrink, the treatment is not sufficient. Or you can use "splash treatment" to detect, if handled well, on the surface of the plastic bottle, will form a dense layer of "water film", which is often referred to as silk screen counterparts "Sheung Shui." The effect of time-dependent polarization treatment on the surface of the bottle has a certain timeliness. The longer the time, the worse the effect, and the poorer the binding force with the ink, ensuring the adhesion of the ink, and printing should be performed immediately after processing. The survey found that due to the limitations of the customer's production process, most printing plants do not have the same polar processing and printing department. This will cause printing lag, which will affect the adhesion of the ink and the bottle.
Print material if it is not pure
If the printing material is not pure, it will have a considerable impact on the adhesion. In the current market, the impure printing material is mainly expressed in the synthetic material and material. Due to process differences in different companies during injection molding, the surface of the plastic material appears different
In addition, there are many materials with grease on the surface that can affect its adhesion. The color of the bottle's material also has an effect on the UV light reception, which also affects its adhesion.
Two bottles of prepress processing
In order to obtain good adhesion of the ink to the substrate, the bottle must be polarized to achieve a surface tension of not less than 3.8 x 10-2 N/m. (In general, the ink is good for the substrate. The most basic condition for adhesion is the substrate sheet
The surface tension reaches at least 50dyn/cm).
The method of polarizing the bottle is mainly flame treatment. The principle of flame treatment is to decontaminate the plastic surface through high temperature and melt the surface of the film layer, thereby increasing the surface energy of the plastic bottle and improving its surface adhesion to the ink. In short, before printing
It must be ensured that the surface of the substrate is clean and the polarization treatment is effective. The surface treatment of the bottle is incomplete, and the adhesion must be affected.
Flame treatment
The flame processor is composed of conveyor belts, tapered inserts, flame nozzles and gas tanks. When used, the plastic bottle is placed on the tapered insert and the conveyor belt moves forward uniformly. Before reaching the flame nozzle, the conical insert starts to rotate, and at the same time, the bottle is rotated, and the blue flame ablates the surface of the plastic bottle. Improve the surface energy of plastic bottles and increase the binding force with ink. The strength of the flame, the running speed of the conveyor belt, and the smoothness of the rotation of the bottle all directly affect the treatment effect, among which the smoothness of the rotation of the bottle is the most critical. The degree of smoothness is proportional to the size of the bottle. The shorter the bottle, the smaller the radius and the better the effect after treatment. For larger bottles, we must take measures to increase its smoothness. The commonly used method is to attach a nylon sleeve to the tapered insert. The inner diameter of the sleeve is also conical, and the outer diameter is equal to the size of the bottle mouth. The jacketed bottle cannot drop on its own and must be removed manually. The flame-treated plastic bottles should be immediately printed, otherwise the surface energy of the plastic bottles will be reduced, and the secondary dust will be easy to affect the adhesion of the ink.
Flame treatment effect detection
The easiest method is to use a surface tension test pen for testing. The 3.8×10-2N/m specification surface tension test pen is used. If the liquid marks in the test stroke spread evenly and do not shrink, it indicates that the treatment effect is good; if the liquid marks shrink, or
If the liquid marks are partially contracted and the crotch part does not shrink, the treatment is not sufficient. Or you can use "splash treatment" to detect, if handled well, on the surface of the plastic bottle, will form a dense layer of "water film", which is often referred to as silk screen counterparts "Sheung Shui." The effect of time-dependent polarization treatment on the surface of the bottle has a certain timeliness. The longer the time, the worse the effect, and the poorer the binding force with the ink, ensuring the adhesion of the ink, and printing should be performed immediately after processing. The survey found that due to the limitations of the customer's production process, most printing plants do not have the same polar processing and printing department. This will cause printing lag, which will affect the adhesion of the ink and the bottle.
- This Eyelash Curler Will Create Long, Curled Lashes, Making Your Eyes More Noticeable.
- With Extra Silicone Pads, It is Pinch- and Pain-Free With Quick Results.
- We Combined a Durable Structure and Super-soft Silicone Pads That Hug Each and Every Lash For Incredible Lift and Curl.
- Perfect Design,Professional Quality the Stainless Steel Lash Curler is Perfect For all Eye Shapes
Gold Eyelash Curler,Gold Heated Eyelash Curler,Gold Eyelash Extension Curler,Rose Gold Eyelash Curler
Bonet Houseware Co., Ltd. , https://www.manicureset.de