According to the material classification, at present, the furniture sold in the market is mainly divided into solid wood furniture and sheet furniture. This classification seems simple, but the furniture placed in the store is finished products, which are solid wood and which are plates. It is difficult to distinguish between ordinary consumers by appearance. Only by mastering certain purchasing skills can we avoid buying shoddy and flashy furniture.
Solid wood furniture refers to furniture made of natural wood, and the texture of the wood is generally seen on the surface of the furniture. At present, there are two kinds of solid wood furniture on the market. One is pure solid wood furniture. All the materials of this kind of furniture are solid wood. The other is imitation solid wood furniture, which is the natural texture, feel and color of wood. They are the same as solid wood furniture, but they are actually furniture made of solid wood and wood-based panels.
Advantages: The material is natural and chemically free, in line with the psychological needs of modern people who admire nature.
Disadvantages: easy to deform, the finished product can not be disassembled, it is not convenient to carry.
Buying points to see wood grain and knots
Due to different materials, in the home store, the same table, the price of solid wood furniture and sheet furniture is more than a thousand dollars. It is understood that the special material of solid wood forms a natural color difference, wood knot and texture. As long as you carefully read it according to the introduction of the merchant, you can identify the solid wood and the board.
Material selection: Nowadays, the wood species used in the Suzhou market are made of elm, teak, maple, eucalyptus, oak, ash, birch, elm, poplar, elm, pine, etc. Among them, eucalyptus, eucalyptus, and ash are the most expensive, and the corresponding prices are also high. Look at the pattern and knot: solid wood furniture has a natural wood texture, a good solid wood board, you see a pattern from the front, open the door, the corresponding position can also see the corresponding pattern. Similarly, pure solid wood boards generally have a front side where the knot is located, and there should also be knots on the other side.
Buying skills three to see two touches and one pressure
For the sake of environmental protection, most solid wood furniture is made by a combination of solid wood and wood-based panels. This process not only avoids cracking and warping due to the large-area use of solid wood, but also maintains pure nature. The beautiful texture of the logs, without losing the noble and elegant nature of solid wood furniture. It is understood that due to the different processing technology, the purchase of such solid wood must be "three look and two touches and one pressure."
"Three look": First of all, we must look at the materials. Generally good solid wood furniture, after opening the door and drawer, the wood is dry and white, the texture is clear, the texture is tight and delicate. At the same time, good solid wood furniture can not have any pungent odor. Look at the components. When buying solid wood furniture, you should carefully check the parts of the furniture, such as the sofa legs, columns, and the load-bearing horizontal bars that are close to the ground between the columns to ensure that there are no large knots or cracks or cracks; check the sliding and positioning of the drawer. Open all the doors and drawers to see if the screws at the joints of the components are tight; whether the internal wood-based panels are edge-sealed, and the various accessories are installed with many pieces, no nails, and no nails. Finally, look at the place of origin. If the moisture content of solid wood furniture is higher than 1% of the average moisture content of the area of ​​use, cracking, deformation, loosening, warping, etc. may occur. Therefore, it is best to buy furniture produced by a brand that has a good dry process. "Two touches": Is to touch the surface is smooth, good solid wood furniture surface is flat, there will be no problems such as protrusions; then touch the furniture corners and other parts, such as rough, indicating that the process is relatively poor. "One pressure": When selecting solid wood furniture, it is necessary to lightly press the various points of the furniture, such as the column foot or the shelf support, to test whether it is stable.
What good maintenance and cleaning methods do solid wood homes have?
If the solid wood furniture is stained with oil, the residual tea is an excellent cleaning agent. After wiping, spray a small amount of corn flour for wiping, and finally wipe the corn flour. Corn flour absorbs all the dirt adsorbed on the furniture surface, making the paint surface smooth and bright. If the surface of solid wood furniture is white wood lacquer, it will easily turn yellow in a long time. You can wipe it with a rag and toothpaste, taking care not to use too much force. You can also mix the two egg yolks and apply them with a soft brush to the yellow area. After drying, carefully wipe them off with a soft cloth. In addition, care should be taken to avoid direct sunlight for direct sunlight during use.
Silicone Travel Jar
Silicone travel jar is made of food grade silicone and pp, the sealed lid is also made of good grade silicone. silicone tavel jar have a three size, 10ml,20ml,30ml. they are perfect for face cream, hand cream,body care cream and also it can as a storage container for earring, pills, necklace, pin etc. most thing can be put on it. Silicone Travel Jar is a mini and tiny thing so you can carry it on traveling and business trip... Silicone have a good leak proof so that silicone travel jar have a good leak proof, That's why it is so popular in the market.
For more: Silicone Travel Bottles, Silicone Travel Tubes, Silicone Travel Bottle Set, Silicone trave jars
Silicone Baby Teether Toys,Silicone Chewing Toy,Baby Teething Toys,Silicone Baby Teething Teethers
Shenzhen Kean Silicone Product Co., Ltd. , https://www.keansilicon.com